Update busybox configuration mechanism. Support building busybox unstable

ifeq ($(USE_BUSYBOX_SNAPSHOT),true)

# Be aware that this changes daily....

BUSYBOX_DIR:=$(BUILD_DIR)/busybox

BUSYBOX_SOURCE=busybox-snapshot.tar.bz2

BUSYBOX_SITE:=http://www.busybox.net/downloads/snapshots

BUSYBOX_SOURCE=busybox-unstable.tar.bz2

BUSYBOX_SITE:=ftp://ftp.busybox.net/busybox/snapshots

BUSYBOX_UNZIP=bzcat

BUSYBOX_PATCH:=$(SOURCE_DIR)/busybox.patch

BUSYBOX_CONFIG:=$(SOURCE_DIR)/busybox.config

else

BUSYBOX_DIR:=$(BUILD_DIR)/busybox-0.60.5

BUSYBOX_SOURCE:=busybox-0.60.5.tar.bz2

BUSYBOX_SITE:=http://www.busybox.net/downloads

BUSYBOX_SITE:=ftp://ftp.busybox.net/busybox

BUSYBOX_UNZIP=bzcat

BUSYBOX_PATCH:=$(SOURCE_DIR)/busybox.patch

BUSYBOX_CONFIG:=$(SOURCE_DIR)/busybox.Config.h

endif

$(DL_DIR)/$(BUSYBOX_SOURCE):

	 $(WGET) -P $(DL_DIR) $(BUSYBOX_SITE)/$(BUSYBOX_SOURCE)

busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_PATCH)

busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)

$(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_PATCH)

$(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)

	$(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) -xvf -

	if [ -n "$(BUSYBOX_PATCH)" ] ; then \

	cat $(BUSYBOX_PATCH) | patch -d $(BUSYBOX_DIR) -p1; fi

ifeq ($(USE_BUSYBOX_SNAPSHOT),true)

	cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.config

	perl -i -p -e "s,^CROSS.*,CROSS=$(TARGET_CROSS)\n\

		PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Rules.mak

ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)

	perl -i -p -e "s/^.*DOLFS.*/DOLFS=y/;" $(BUSYBOX_DIR)/.config

endif

else  # Not usine snapshot

	cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/Config.h

	perl -i -p -e "s,^CROSS.*,CROSS=$(TARGET_CROSS),;" $(BUSYBOX_DIR)/Makefile

	perl -i -p -e "s,^PREFIX.*,PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Makefile

	perl -i -p -e "s/^MD5SUM_SIZE_VS_SPEED.*/MD5SUM_SIZE_VS_SPEED 0/;" $(BUSYBOX_DIR)/md5sum.c

ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)

	perl -i -p -e "s/^DOLFS.*/DOLFS=true/;" $(BUSYBOX_DIR)/Makefile

endif

endif

	touch $(BUSYBOX_DIR)/.configured

/* vi: set sw=4 ts=4: */

// This file defines the feature set to be compiled into busybox.

// When you turn things off here, they won't be compiled in at all.

//

//// This file is parsed by sed.  You MUST use single line comments.

//   i.e.,  //#define BB_BLAH

//

//

// BusyBox Applications

//#define BB_ADJTIMEX

#define BB_AR

#define BB_ASH

#define BB_BASENAME

#define BB_CAT

#define BB_CHGRP

#define BB_CHMOD

#define BB_CHOWN

#define BB_CHROOT

#define BB_CHVT

#define BB_CLEAR

#define BB_CMP

#define BB_CP

#define BB_CPIO

#define BB_CUT

#define BB_DATE

#define BB_DC

#define BB_DD

#define BB_DEALLOCVT

#define BB_DF

#define BB_DIRNAME

#define BB_DMESG

//#define BB_DOS2UNIX

//#define BB_DPKG

//#define BB_DPKG_DEB

//#define BB_DUTMP

#define BB_DU

//#define BB_DUMPKMAP

#define BB_ECHO

#define BB_ENV

#define BB_EXPR

#define BB_FBSET

//#define BB_FDFLUSH

#define BB_FIND

#define BB_FREE

#define BB_FREERAMDISK

//#define BB_FSCK_MINIX

//#define BB_GETOPT

#define BB_GREP

#define BB_GUNZIP

#define BB_GZIP

#define BB_HALT

#define BB_HEAD

#define BB_HOSTID

#define BB_HOSTNAME

//#define BB_HUSH

#define BB_ID

#define BB_IFCONFIG

#define BB_INIT

#define BB_INSMOD

#define BB_KILL

#define BB_KILLALL

#define BB_KLOGD

//#define BB_LASH

//#define BB_LENGTH

#define BB_LN

//#define BB_LOADACM

//#define BB_LOADFONT

//#define BB_LOADKMAP

#define BB_LOGGER

#define BB_LOGNAME

#define BB_LOSETUP

#define BB_LS

#define BB_LSMOD

//#define BB_MAKEDEVS

#define BB_MD5SUM

#define BB_MKDIR

//#define BB_MKFIFO

//#define BB_MKFS_MINIX

#define BB_MKNOD

#define BB_MKSWAP

#define BB_MKTEMP

#define BB_MODPROBE

#define BB_MORE

#define BB_MOUNT

//#define BB_MSH

//#define BB_MT

#define BB_MV

#define BB_NC

#define BB_NSLOOKUP

#define BB_PIDOF

#define BB_PING

#define BB_PIVOT_ROOT

#define BB_POWEROFF

#define BB_PRINTF

#define BB_PS

#define BB_PWD

#define BB_RDATE

#define BB_READLINK

#define BB_REBOOT

//#define BB_RENICE

#define BB_RESET

#define BB_RM

#define BB_RMDIR

#define BB_RMMOD

#define BB_ROUTE

//#define BB_RPM2CPIO

#define BB_SED

//#define BB_SETKEYCODES

#define BB_SLEEP

#define BB_SORT

#define BB_STRINGS

#define BB_STTY

#define BB_SWAPONOFF

#define BB_SYNC

#define BB_SYSLOGD

#define BB_TAIL

#define BB_TAR

#define BB_TEE

#define BB_TEST

#define BB_TELNET

#define BB_TFTP

#define BB_TIME

#define BB_TOP

#define BB_TOUCH

#define BB_TR

#define BB_TRACEROUTE

#define BB_TRUE_FALSE

#define BB_TTY

//#define BB_UNIX2DOS

#define BB_UUENCODE

#define BB_UUDECODE

#define BB_UMOUNT

#define BB_UNIQ

#define BB_UNAME

//#define BB_UPDATE

#define BB_UPTIME

#define BB_USLEEP

#define BB_VI

//#define BB_WATCHDOG

#define BB_WC

#define BB_WGET

#define BB_WHICH

#define BB_WHOAMI

#define BB_XARGS

#define BB_YES

// End of Applications List

//

//

//

// ---------------------------------------------------------

// This is where feature definitions go.  Generally speaking,

// turning this stuff off makes things a bit smaller (and less 

// pretty/useful).

//

//

// If you enabled one or more of the shells, you may select which one

// should be run when sh is invoked:

#define BB_FEATURE_SH_IS_ASH

//#define BB_FEATURE_SH_IS_HUSH

//#define BB_FEATURE_SH_IS_LASH

//#define BB_FEATURE_SH_IS_MSH

//

// BusyBox will, by default, malloc space for its buffers.  This costs code

// size for the call to xmalloc.  You can use the following feature to have

// them put on the stack.  For some very small machines with limited stack

// space, this can be deadly.  For most folks, this works just fine...

//#define BB_FEATURE_BUFFERS_GO_ON_STACK

// The third alternative for buffer allocation is to use BSS.  This works

// beautifully for computers with a real MMU (and OS support), but wastes

// runtime RAM for uCLinux.  This behavior was the only one available for

// BusyBox versions 0.48 and earlier.

//#define BB_FEATURE_BUFFERS_GO_IN_BSS

//

// Turn this on to use Erik's very cool devps, and devmtab kernel drivers,

// thereby eliminating the need for the /proc filesystem and thereby saving

// lots and lots memory for more important things.  NOTE:  If you enable this

// feature, you _must_ have patched the kernel to include the devps patch that

// is included in the busybox/kernel-patches directory.  You will also need to

// create some device special files in /dev on your embedded system:

//        mknod /dev/mtab c 10 22

//        mknod /dev/ps c 10 21

// I emailed Linus and this patch will not be going into the stock kernel.

//#define BB_FEATURE_USE_DEVPS_PATCH

//

// show verbose usage messages

#define BB_FEATURE_VERBOSE_USAGE

//

// Use termios to manipulate the screen ('more' is prettier with this on)

#define BB_FEATURE_USE_TERMIOS

//

// calculate terminal & column widths (for more, ls, and telnet)

#define BB_FEATURE_AUTOWIDTH

//

// show username/groupnames for ls

#define BB_FEATURE_LS_USERNAME

//

// show file timestamps in ls

#define BB_FEATURE_LS_TIMESTAMPS

//

// enable ls -p and -F

#define BB_FEATURE_LS_FILETYPES

//

// sort the file names

#define BB_FEATURE_LS_SORTFILES

//

// enable ls -R

#define BB_FEATURE_LS_RECURSIVE

//

// enable ls -L

#define BB_FEATURE_LS_FOLLOWLINKS

//

// Use color to identify different file types

#define BB_FEATURE_LS_COLOR

//

// Disable for a smaller (but less functional) ping

#define BB_FEATURE_FANCY_PING

//

// Make init use a simplified /etc/inittab file (recommended).

#define BB_FEATURE_USE_INITTAB

//

//Enable init being called as /linuxrc

#define BB_FEATURE_LINUXRC

//

//Have init enable core dumping for child processes (for debugging only) 

//#define BB_FEATURE_INIT_COREDUMPS

//

//Make sure nothing is printed to the console on boot

#define BB_FEATURE_EXTRA_QUIET

//

// enable syslogd -R remotehost

//#define BB_FEATURE_REMOTE_LOG

//

// enable syslogd -C

//#define BB_FEATURE_IPC_SYSLOG

//

//Disable for a simple tail implementation (2.34k vs 3k for the full one).

//Both provide 'tail -f', but this cuts out -c, -q, -s, and -v. 

#define BB_FEATURE_FANCY_TAIL

//

// Enable support for loop devices in mount

#define BB_FEATURE_MOUNT_LOOP

//

// Enable support for a real /etc/mtab file instead of /proc/mounts

//#define BB_FEATURE_MTAB_SUPPORT

//

// Enable support for mounting remote NFS volumes. 

// You may need to mount with "-o nolock" if you are

// not running a local portmapper daemon...

//

// If you are using uClibc, be sure that you've already compiled

// uClibc with INCLUDE_RPC=true (contained in the Config file)

//#define BB_FEATURE_NFSMOUNT

//

// Enable support forced filesystem unmounting 

// (i.e., in case of an unreachable NFS system).

#define BB_FEATURE_MOUNT_FORCE

//

// Enable support for creation of tar files.

#define BB_FEATURE_TAR_CREATE

//

// Enable support for "--exclude" and "-X" for excluding files

#define BB_FEATURE_TAR_EXCLUDE

//

// Enable support for tar -z option (currently only works for inflating)

#define BB_FEATURE_TAR_GZIP 

//

// Enable reverse sort

#define BB_FEATURE_SORT_REVERSE

//

// Enable uniqe sort

#define BB_FEATURE_SORT_UNIQUE

//

// Enable command line editing in the shell.  

// Only relevant if a shell is enabled. On by default.

#define BB_FEATURE_COMMAND_EDITING

//

// Enable tab completion in the shell.  This is now working quite nicely.

// This feature adds a bit over 4k. Only relevant if a shell is enabled.

#define BB_FEATURE_COMMAND_TAB_COMPLETION

//

// Attempts to match usernames in a ~-prefixed path

#define BB_FEATURE_COMMAND_USERNAME_COMPLETION

//

//Allow the shell to invoke all the compiled in BusyBox applets as if they

//were shell builtins.  Nice for staticly linking an emergency rescue shell,

//among other things. Off by default.

// Only relevant if a shell is enabled.

//#define BB_FEATURE_SH_STANDALONE_SHELL

//

//When this is enabled, busybox shell applets can be called using full path

//names.  This causes applets (i.e., most busybox commands) to override

//real commands on the filesystem.  For example, if you run run /bin/cat, it

//will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_

//busybox.  Some systems want this, others do not.  Choose wisely.  :-) This

//only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled.

// Only relevant if a shell is enabled. Off by default.

//#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN

//

// Uncomment this option for a fancy shell prompt that includes the

// current username and hostname.  On systems that don't have usernames

// or hostnames, this can look hideous.

// Only relevant if a shell is enabled.

#define BB_FEATURE_SH_FANCY_PROMPT

//

// Uncomment this option to disable job control.  Job control lets you 

// run jobs in the background (which completely useless for is all you 

// are doing is running scripts).  Disabing this is bad for interactive

// use, since when you hit ^C in an application, it will also kill the 

// shell.  This adds about 2.5k on an x86 system.

#define BB_FEATURE_ASH_JOB_CONTROL

//

//Turn on extra fbset options

//#define BB_FEATURE_FBSET_FANCY

//

//Turn on fbset readmode support

//#define BB_FEATURE_FBSET_READMODE

//

// Support insmod/lsmod/rmmod for post 2.1 kernels

#define BB_FEATURE_NEW_MODULE_INTERFACE

//

// Support insmod/lsmod/rmmod for pre 2.1 kernels

//#define BB_FEATURE_OLD_MODULE_INTERFACE

//

// Support module version checking

//#define BB_FEATURE_INSMOD_VERSION_CHECKING

//

// Support for uClinux memory usage optimization, which will load the image

// directly into the kernel memory.  This divides memory requrements by three.

// If you are not running uClinux (i.e., your CPU has an MMU) leave this

// disabled...

//#define BB_FEATURE_INSMOD_LOADINKMEM

//

// Support for Minix filesystem, version 2

//#define BB_FEATURE_MINIX2

//

// Enable ifconfig status reporting output -- this feature adds 7k.

#define BB_FEATURE_IFCONFIG_STATUS

//

// Enable ifconfig slip-specific options "keepalive" and "outfill"

//#define BB_FEATURE_IFCONFIG_SLIP

//

// Enable ifconfig options "mem_start", "io_addr", and "irq".

#define BB_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ

//

// Enable ifconfig option "hw".  Currently works for only with "ether".

#define BB_FEATURE_IFCONFIG_HW

//

// Allows "broadcast +" to set broadcast automatically based on hostaddr

// and netmask, at a cost of about 100 bytes of code (i386).

//#define BB_FEATURE_IFCONFIG_BROADCAST_PLUS

//

// Enable busybox --install [-s]

// to create links (or symlinks) for all the commands that are 

// compiled into the binary.  (needs /proc filesystem)

//#define BB_FEATURE_INSTALLER

//

// Enable a nifty progress meter in wget (adds just under 2k)

#define BB_FEATURE_WGET_STATUSBAR

//

// Enable HTTP authentication in wget

#define BB_FEATURE_WGET_AUTHENTICATION

//

// Clean up all memory before exiting -- usually not needed

// as the OS can clean up...  Don't enable this unless you

// have a really good reason for cleaning things up manually.

//#define BB_FEATURE_CLEAN_UP

//

// Support for human readable output by ls, du, etc.(example 13k, 23M, 235G)

#define BB_FEATURE_HUMAN_READABLE

//

// Support for the find -type option.

#define BB_FEATURE_FIND_TYPE

//

// Support for the find -perm option.

#define BB_FEATURE_FIND_PERM

//

// Support for the find -mtime option.

#define BB_FEATURE_FIND_MTIME

//

//// Support for the find -newer option.

#define BB_FEATURE_FIND_NEWER

//

// Support for the -A -B and -C context flags in grep

#define BB_FEATURE_GREP_CONTEXT

//

// Support for the EGREP applet (alias to the grep applet)

//#define BB_FEATURE_GREP_EGREP_ALIAS

//

// Tell tftp what commands that should be supported.

#define BB_FEATURE_TFTP_PUT

#define BB_FEATURE_TFTP_GET

//

// features for vi

#define BB_FEATURE_VI_COLON		// ":" colon commands, no "ex" mode

#define BB_FEATURE_VI_YANKMARK		// Yank/Put commands and Mark cmds

#define BB_FEATURE_VI_SEARCH		// search and replace cmds

#define BB_FEATURE_VI_USE_SIGNALS	// catch signals

#define BB_FEATURE_VI_DOT_CMD		// remember previous cmd and "." cmd

#define BB_FEATURE_VI_READONLY		// vi -R and "view" mode

#define BB_FEATURE_VI_SETOPTS		// set-able options,  ai ic showmatch

#define BB_FEATURE_VI_SET		// :set

#define BB_FEATURE_VI_WIN_RESIZE	// handle window resize

//

// Enable a if you system have setuped locale

//#define BB_LOCALE_SUPPORT

//

// Support for TELNET to pass TERM type to remote host.  Adds 384 bytes.

#define BB_FEATURE_TELNET_TTYPE

//

// Support for devfs.

//#define BB_FEATURE_DEVFS

//

// End of Features List

//

//

//

//

//

//

//---------------------------------------------------

// Nothing beyond this point should ever be touched by 

// mere mortals so leave this stuff alone.

//

#include <features.h>

#if defined(__uClinux__)

	#undef BB_ASH			/* Not even a chance it will work */

	#undef BB_RPM2CPIO		/* Uses gz_open(), which uses fork() */

	#undef BB_DPKG_DEB		/* Uses gz_open(), which uses fork() */

	#undef BB_FEATURE_TAR_GZIP	/* Uses fork() */

	#undef BB_UPDATE		/* Uses daemon() */

#endif

#if defined BB_ASH || defined BB_HUSH || defined BB_LASH || defined BB_MSH

	#if defined BB_FEATURE_COMMAND_EDITING

		#define BB_CMDEDIT

	#else

		#undef BB_FEATURE_COMMAND_EDITING

		#undef BB_FEATURE_COMMAND_TAB_COMPLETION

		#undef BB_FEATURE_COMMAND_USERNAME_COMPLETION

		#undef BB_FEATURE_SH_FANCY_PROMPT

	#endif

#else

	#undef BB_FEATURE_SH_APPLETS_ALWAYS_WIN

	#undef BB_FEATURE_SH_STANDALONE_SHELL

	#undef BB_FEATURE_SH_FANCY_PROMPT

#endif

//

#if (defined BB_ASH || defined BB_HUSH || defined BB_MSH) && ! defined BB_TEST

	#define BB_TEST

#endif

//

#ifdef BB_KILLALL

	#ifndef BB_KILL

		#define BB_KILL

	#endif

#endif

//

#ifndef BB_INIT

	#undef BB_FEATURE_LINUXRC

#endif

//

#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT

	#define BB_NFSMOUNT

#endif

//

#if defined BB_FEATURE_AUTOWIDTH

	#ifndef BB_FEATURE_USE_TERMIOS

		#define BB_FEATURE_USE_TERMIOS

	#endif

#endif

//

#if defined BB_INSMOD || defined BB_LSMOD

	#if ! defined BB_FEATURE_NEW_MODULE_INTERFACE && ! defined BB_FEATURE_OLD_MODULE_INTERFACE

		#define BB_FEATURE_NEW_MODULE_INTERFACE

	#endif

#endif

//

#ifdef BB_UNIX2DOS

	#define BB_DOS2UNIX

#endif	

//

#ifdef BB_SYSLOGD

	#if defined BB_FEATURE_IPC_SYSLOG

		#define BB_LOGREAD

	#endif

#endif

//

#if defined BB_ASH && defined BB_FEATURE_SH_IS_ASH

# define shell_main ash_main

#elif defined BB_HUSH && defined BB_FEATURE_SH_IS_HUSH

# define shell_main hush_main

#elif defined BB_LASH && defined BB_FEATURE_SH_IS_LASH

# define shell_main lash_main

#elif defined BB_MSH && defined BB_FEATURE_SH_IS_MSH

# define shell_main msh_main

#endif

#

# Automatically generated make config: don't edit

#

HAVE_DOT_CONFIG=y

#

# General Configuration

#

# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set

CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y

# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set

CONFIG_FEATURE_VERBOSE_USAGE=y

# CONFIG_FEATURE_INSTALLER is not set

# CONFIG_LOCALE_SUPPORT is not set

CONFIG_FEATURE_DEVFS=y

CONFIG_FEATURE_DEVPTS=y

# CONFIG_FEATURE_CLEAN_UP is not set

# CONFIG_FEATURE_SUID is not set

#

# Build Options

#

DOSTATIC=y

DOLFS=y

# USING_CROSS_COMPILER is not set

EXTRA_CFLAGS_OPTIONS=""

#

# Archival Utilities

#

CONFIG_AR=y

CONFIG_FEATURE_AR_LONG_FILENAMES=y

CONFIG_BUNZIP2=y

CONFIG_CPIO=y

CONFIG_DPKG=y

CONFIG_DPKG_DEB=y

# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set

CONFIG_FEATURE_DEB_TAR_GZ=y

CONFIG_FEATURE_DEB_TAR_BZ2=y

CONFIG_GUNZIP=y

CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y

CONFIG_GZIP=y

CONFIG_RPM2CPIO=y

CONFIG_RPM=y

CONFIG_TAR=y

CONFIG_FEATURE_TAR_CREATE=y

CONFIG_FEATURE_TAR_BZIP2=y

CONFIG_FEATURE_TAR_EXCLUDE=y

CONFIG_FEATURE_TAR_GZIP=y

CONFIG_FEATURE_TAR_OLD_FORMAT=y

CONFIG_FEATURE_GNUTAR_LONG_FILENAME=y

CONFIG_FEATURE_UNARCHIVE_TAPE=y

CONFIG_UNCOMPRESS=y

CONFIG_UNZIP=y

#

# Console Utilities

#

CONFIG_CHVT=y

CONFIG_CLEAR=y

CONFIG_DEALLOCVT=y

CONFIG_DUMPKMAP=y

CONFIG_LOADACM=y

CONFIG_LOADFONT=y

CONFIG_LOADKMAP=y

CONFIG_OPENVT=y

CONFIG_RESET=y

CONFIG_SETKEYCODES=y

#

# Debian Utilities

#

CONFIG_MKTEMP=y

CONFIG_READLINK=y

CONFIG_RUN_PARTS=y

CONFIG_WHICH=y

#

# Editors

#

CONFIG_AWK=y

CONFIG_FEATURE_AWK_MATH=y

CONFIG_SED=y

CONFIG_VI=y

CONFIG_FEATURE_VI_COLON=y

CONFIG_FEATURE_VI_YANKMARK=y

CONFIG_FEATURE_VI_SEARCH=y

CONFIG_FEATURE_VI_USE_SIGNALS=y

CONFIG_FEATURE_VI_DOT_CMD=y

CONFIG_FEATURE_VI_READONLY=y

CONFIG_FEATURE_VI_SETOPTS=y

CONFIG_FEATURE_VI_SET=y

CONFIG_FEATURE_VI_WIN_RESIZE=y

CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y

#

# File Utilities

#

CONFIG_CHMOD=y

CONFIG_CHOWN=y

CONFIG_CHGRP=y

CONFIG_CP=y

CONFIG_DD=y

CONFIG_DF=y

CONFIG_DU=y

CONFIG_LN=y

CONFIG_LS=y

CONFIG_FEATURE_LS_FILETYPES=y

CONFIG_FEATURE_LS_FOLLOWLINKS=y

CONFIG_FEATURE_LS_RECURSIVE=y

CONFIG_FEATURE_LS_SORTFILES=y

CONFIG_FEATURE_LS_TIMESTAMPS=y

CONFIG_FEATURE_LS_USERNAME=y

CONFIG_FEATURE_LS_COLOR=y

CONFIG_MKDIR=y

CONFIG_MKFIFO=y

CONFIG_MKNOD=y

CONFIG_MV=y

CONFIG_RM=y

CONFIG_RMDIR=y

CONFIG_SYNC=y

CONFIG_TOUCH=y

#

# Common options for cp and mv

#

CONFIG_FEATURE_PRESERVE_HARDLINKS=y

#

# Common options for ls and more

#

CONFIG_FEATURE_AUTOWIDTH=y

#

# Common options for df, du, ls

#

CONFIG_FEATURE_HUMAN_READABLE=y

#

# Finding Utilities

#

CONFIG_FIND=y

CONFIG_FEATURE_FIND_MTIME=y

CONFIG_FEATURE_FIND_PERM=y

CONFIG_FEATURE_FIND_TYPE=y

CONFIG_FEATURE_FIND_XDEV=y

CONFIG_GREP=y

CONFIG_FEATURE_GREP_EGREP_ALIAS=y

CONFIG_FEATURE_GREP_CONTEXT=y

CONFIG_XARGS=y

#

# Init Utilities

#

CONFIG_INIT=y

CONFIG_FEATURE_USE_INITTAB=y

CONFIG_FEATURE_INITRD=y

# CONFIG_FEATURE_INIT_COREDUMPS is not set

# CONFIG_FEATURE_EXTRA_QUIET is not set

CONFIG_HALT=y

CONFIG_POWEROFF=y

CONFIG_REBOOT=y

CONFIG_START_STOP_DAEMON=y

CONFIG_MESG=y

#

# Login/Password Management Utilities

#

CONFIG_USE_BB_PWD_GRP=y

CONFIG_ADDGROUP=y

CONFIG_DELGROUP=y

CONFIG_ADDUSER=y

CONFIG_DELUSER=y

CONFIG_GETTY=y

CONFIG_LOGIN=y

CONFIG_FEATURE_SECURETTY=y

CONFIG_PASSWD=y

CONFIG_SU=y

CONFIG_FEATURE_SHADOWPASSWDS=y

CONFIG_USE_BB_SHADOW=y

CONFIG_SULOGIN=y

CONFIG_VLOCK=y

#

# Miscellaneous Utilities

#

CONFIG_ADJTIMEX=y

CONFIG_CROND=y

CONFIG_CRONTAB=y

CONFIG_DC=y

CONFIG_DUTMP=y

CONFIG_MAKEDEVS=y

CONFIG_MT=y

CONFIG_STRINGS=y

CONFIG_TIME=y

CONFIG_UPDATE=y

CONFIG_WATCHDOG=y

#

# Module Utilities

#

# CONFIG_INSMOD is not set

# CONFIG_LSMOD is not set

# CONFIG_MODPROBE is not set

# CONFIG_RMMOD is not set

#

# Networking Utilities

#

CONFIG_FEATURE_IPV6=y

# CONFIG_ARPING is not set

CONFIG_FTPGET=y

CONFIG_FTPPUT=y

CONFIG_HOSTNAME=y

# CONFIG_HTTPD is not set

CONFIG_IFCONFIG=y

CONFIG_FEATURE_IFCONFIG_STATUS=y

CONFIG_FEATURE_IFCONFIG_SLIP=y

CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y

CONFIG_FEATURE_IFCONFIG_HW=y

CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y

CONFIG_IFUPDOWN=y

CONFIG_FEATURE_IFUPDOWN_IPV4=y

CONFIG_FEATURE_IFUPDOWN_IPV6=y

CONFIG_FEATURE_IFUPDOWN_IPX=y

CONFIG_FEATURE_IFUPDOWN_MAPPING=y

CONFIG_IP=y

CONFIG_FEATURE_IP_ADDRESS=y

#

#   address (forced enabled for ipaddr)

#

CONFIG_FEATURE_IP_LINK=y

#

#   link (forced enabled for iplink)

#

CONFIG_FEATURE_IP_ROUTE=y

#

#   route (forced enabled for iproute)

#

CONFIG_FEATURE_IP_TUNNEL=y

#

#   tunnel (forced enabled for iptunnel)

#

CONFIG_IPCALC=y

CONFIG_FEATURE_IPCALC_FANCY=y

CONFIG_IPADDR=y

CONFIG_IPLINK=y

CONFIG_IPROUTE=y

CONFIG_IPTUNNEL=y

CONFIG_NAMEIF=y

CONFIG_NC=y

CONFIG_NETSTAT=y

CONFIG_NSLOOKUP=y

CONFIG_PING=y

CONFIG_FEATURE_FANCY_PING=y

CONFIG_PING6=y

CONFIG_FEATURE_FANCY_PING6=y

CONFIG_ROUTE=y

CONFIG_TELNET=y

CONFIG_FEATURE_TELNET_TTYPE=y

CONFIG_TELNETD=y

CONFIG_TFTP=y

CONFIG_FEATURE_TFTP_GET=y

CONFIG_FEATURE_TFTP_PUT=y

CONFIG_FEATURE_TFTP_BLOCKSIZE=y

CONFIG_FEATURE_TFTP_DEBUG=y

CONFIG_TRACEROUTE=y

CONFIG_FEATURE_TRACEROUTE_VERBOSE=y

CONFIG_FEATURE_TRACEROUTE_SO_DEBUG=y

CONFIG_WGET=y

CONFIG_FEATURE_WGET_STATUSBAR=y

CONFIG_FEATURE_WGET_AUTHENTICATION=y

#

# udhcp Server/Client

#

CONFIG_UDHCPD=y

CONFIG_UDHCPC=y

CONFIG_DUMPLEASES=y

CONFIG_FEATURE_UDHCP_SYSLOG=y

CONFIG_FEATURE_UDHCP_DEBUG=y

#

# Process Utilities

#

CONFIG_FREE=y

CONFIG_KILL=y

CONFIG_KILLALL=y

CONFIG_PIDOF=y

CONFIG_PS=y

CONFIG_RENICE=y

CONFIG_TOP=y

FEATURE_CPU_USAGE_PERCENTAGE=y

CONFIG_UPTIME=y

#

# Another Bourne-like Shell

#

CONFIG_FEATURE_SH_IS_ASH=y

# CONFIG_FEATURE_SH_IS_HUSH is not set

# CONFIG_FEATURE_SH_IS_LASH is not set

# CONFIG_FEATURE_SH_IS_MSH is not set

# CONFIG_FEATURE_SH_IS_NONE is not set

CONFIG_ASH=y

#

# ash (forced enabled as default shell)

#

#

# Ash Shell Options

#

CONFIG_ASH_JOB_CONTROL=y

CONFIG_ASH_ALIAS=y

CONFIG_ASH_MATH_SUPPORT=y

CONFIG_ASH_GETOPTS=y

CONFIG_ASH_CMDCMD=y

CONFIG_ASH_MAIL=y

CONFIG_ASH_OPTIMIZE_FOR_SIZE=y

# CONFIG_HUSH is not set

# CONFIG_LASH is not set

# CONFIG_MSH is not set

#

# Bourne Shell Options

#

CONFIG_FEATURE_COMMAND_EDITING=y

CONFIG_FEATURE_COMMAND_SAVEHISTORY=y

CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y

CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION=y

CONFIG_FEATURE_COMMAND_HISTORY=15

CONFIG_FEATURE_SH_STANDALONE_SHELL=y

CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN=y

CONFIG_FEATURE_SH_FANCY_PROMPT=y

# CONFIG_FEATURE_SH_EXTRA_QUIET is not set

#

# Shell Utilities

#

CONFIG_BASENAME=y

CONFIG_CAL=y

CONFIG_CHROOT=y

CONFIG_DATE=y

#

# date (forced enabled for use with watch)

#

CONFIG_FEATURE_DATE_ISOFMT=y

CONFIG_DIRNAME=y

CONFIG_ECHO=y

CONFIG_ENV=y

CONFIG_EXPR=y

CONFIG_FALSE=y

CONFIG_HOSTID=y

CONFIG_ID=y

CONFIG_LOGNAME=y

CONFIG_PRINTF=y

CONFIG_PWD=y

# CONFIG_REALPATH is not set

CONFIG_SLEEP=y

CONFIG_STTY=y

CONFIG_TEE=y

CONFIG_TRUE=y

CONFIG_TEST=y

#

# test (forced enabled for use with shell)

#

CONFIG_TTY=y

CONFIG_UNAME=y

CONFIG_USLEEP=y

CONFIG_WATCH=y

CONFIG_WHO=y

CONFIG_WHOAMI=y

CONFIG_YES=y