configs: add sample for freescale p1010rdb

CONFIG_PPC_85xx=y

CONFIG_PHYS_64BIT=y

CONFIG_EXPERIMENTAL=y

CONFIG_SYSVIPC=y

CONFIG_POSIX_MQUEUE=y

CONFIG_BSD_PROCESS_ACCT=y

CONFIG_AUDIT=y

CONFIG_IRQ_DOMAIN_DEBUG=y

CONFIG_NO_HZ=y

CONFIG_HIGH_RES_TIMERS=y

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_BLK_DEV_INITRD=y

CONFIG_EXPERT=y

CONFIG_KALLSYMS_ALL=y

CONFIG_MODULES=y

CONFIG_MODULE_UNLOAD=y

CONFIG_MODULE_FORCE_UNLOAD=y

CONFIG_MODVERSIONS=y

# CONFIG_BLK_DEV_BSG is not set

CONFIG_P1010_RDB=y

CONFIG_HIGHMEM=y

CONFIG_SWIOTLB=y

CONFIG_FORCE_MAX_ZONEORDER=12

CONFIG_PCI=y

CONFIG_PCI_MSI=y

CONFIG_RAPIDIO=y

CONFIG_NET=y

CONFIG_PACKET=y

CONFIG_UNIX=y

CONFIG_XFRM_USER=y

CONFIG_NET_KEY=y

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

CONFIG_IP_ADVANCED_ROUTER=y

CONFIG_IP_MULTIPLE_TABLES=y

CONFIG_IP_ROUTE_MULTIPATH=y

CONFIG_IP_ROUTE_VERBOSE=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

CONFIG_IP_PNP_RARP=y

CONFIG_NET_IPIP=y

CONFIG_IP_MROUTE=y

CONFIG_IP_PIMSM_V1=y

CONFIG_IP_PIMSM_V2=y

CONFIG_ARPD=y

CONFIG_INET_ESP=y

# CONFIG_INET_XFRM_MODE_BEET is not set

CONFIG_INET_LRO=y

CONFIG_IPV6=y

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

CONFIG_DEVTMPFS=y

CONFIG_MTD=y

CONFIG_MTD_CMDLINE_PARTS=y

CONFIG_MTD_CHAR=y

CONFIG_MTD_BLOCK=y

CONFIG_FTL=y

CONFIG_MTD_CFI=y

CONFIG_MTD_CFI_INTELEXT=y

CONFIG_MTD_CFI_AMDSTD=y

CONFIG_MTD_PHYSMAP_OF=y

CONFIG_MTD_M25P80=y

CONFIG_MTD_NAND=y

CONFIG_MTD_NAND_FSL_ELBC=y

CONFIG_MTD_NAND_FSL_IFC=y

CONFIG_PROC_DEVICETREE=y

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_NBD=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_SIZE=131072

CONFIG_EEPROM_LEGACY=y

CONFIG_BLK_DEV_SD=y

CONFIG_CHR_DEV_ST=y

CONFIG_BLK_DEV_SR=y

CONFIG_CHR_DEV_SG=y

CONFIG_SCSI_MULTI_LUN=y

CONFIG_SCSI_LOGGING=y

CONFIG_ATA=y

CONFIG_SATA_FSL=y

CONFIG_NETDEVICES=y

CONFIG_DUMMY=y

CONFIG_GIANFAR=y

CONFIG_VITESSE_PHY=y

CONFIG_FIXED_PHY=y

CONFIG_SERIO_LIBPS2=y

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250_CONSOLE=y

CONFIG_SERIAL_8250_NR_UARTS=2

CONFIG_SERIAL_8250_RUNTIME_UARTS=2

CONFIG_SERIAL_8250_MANY_PORTS=y

CONFIG_SERIAL_8250_DETECT_IRQ=y

CONFIG_SERIAL_8250_RSA=y

CONFIG_SERIAL_QE=m

CONFIG_NVRAM=y

CONFIG_I2C=y

CONFIG_I2C_CHARDEV=y

CONFIG_I2C_CPM=m

CONFIG_I2C_MPC=y

CONFIG_SPI=y

CONFIG_SPI_FSL_SPI=y

CONFIG_SPI_FSL_ESPI=y

CONFIG_GPIO_MPC8XXX=y

# CONFIG_HWMON is not set

CONFIG_USB=y

CONFIG_USB_MON=y

CONFIG_USB_EHCI_HCD=y

CONFIG_USB_EHCI_FSL=y

CONFIG_USB_STORAGE=y

CONFIG_MMC=y

CONFIG_MMC_SDHCI=y

CONFIG_MMC_SDHCI_PLTFM=y

CONFIG_MMC_SDHCI_OF_ESDHC=y

CONFIG_EDAC=y

CONFIG_EDAC_MM_EDAC=y

CONFIG_RTC_CLASS=y

CONFIG_RTC_DRV_CMOS=y

CONFIG_DMADEVICES=y

CONFIG_FSL_DMA=y

# CONFIG_NET_DMA is not set

CONFIG_EXT4_FS=y

CONFIG_EXT4_USE_FOR_EXT23=y

CONFIG_MSDOS_FS=m

CONFIG_VFAT_FS=y

CONFIG_PROC_KCORE=y

CONFIG_TMPFS=y

CONFIG_JFFS2_FS=y

CONFIG_SQUASHFS=y

CONFIG_NFS_FS=y

CONFIG_NFS_V4=y

CONFIG_ROOT_NFS=y

CONFIG_NFSD=y

CONFIG_CRC_T10DIF=y

CONFIG_DEBUG_FS=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DEBUG_INFO=y

CONFIG_CRYPTO_PCBC=m

CONFIG_CRYPTO_SHA256=y

CONFIG_CRYPTO_SHA512=y

CONFIG_CRYPTO_AES=y

# CONFIG_CRYPTO_ANSI_CPRNG is not set

CONFIG_CRYPTO_DEV_FSL_CAAM=y

******************** WARNING ********************

The compiled U-Boot binary is intended for NOR flash only!

It won't work for NAND or SPI and will brick those bootloaders!

Also don't go playing around with different U-boot versions or flash targets

unless you've got the necessary hardware and/or know-how to unbrick your kit.

2012.10 is known good for NOR, but BAD for NAND and SPI.

******************** WARNING ********************

You'll need to program the files created by buildroot into the flash.

The fast way is to tftp transfer the files via one of the network interfaces.

Alternatively you can transfer the files via serial console with an Ymodem

file transfer from your terminal program by using a "loady" command

from the u-boot prompt instead of the "tftp ..." commands stated below.

Beware that serial console file transfers are quite slow!

Remember to set the P1010RDB switches to NOR boot if you want to use

your newly built U-Boot.

1. Program the new U-Boot binary to NOR flash (optional)

    If you don't feel confident upgrading your bootloader then don't do it,

    it's unnecessary most of the time.

    => tftp $loadaddr u-boot.bin

    => protect off 0xeff80000 +$filesize

    => erase 0xeff80000 +$filesize

    => cp.b $loadaddr 0xeff80000 $filesize

2. Program the DTB to NOR flash

    => tftp $loadaddr p1010rdb.dtb

    => erase 0xee000000 +$filesize

    => cp.b $loadaddr 0xee000000 $filesize

3. Program the kernel to NOR flash

    => tftp $loadaddr uImage

    => erase 0xee080000 +$filesize

    => cp.b $loadaddr 0xee080000 $filesize

4. Program the root filesystem to NOR flash

    => tftp $loadaddr rootfs.jffs2

    => erase 0xee800000 0xeff5ffff

    => cp.b $loadaddr 0xee800000 $filesize

5. Booting your new system

    => setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000'

    If you want to set this boot option as default:

    => setenv bootcmd 'run norboot'

    => saveenv

    ...or for a single boot:

    => run norboot

    You can login with user "root".

# Architecture

BR2_powerpc=y

BR2_powerpc_8548=y

# Filesystem

# BR2_TARGET_ROOTFS_TAR is not set

BR2_TARGET_ROOTFS_JFFS2=y

BR2_TARGET_ROOTFS_JFFS2_CUSTOM=y

BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x20

BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x20000

# Lock to 3.8 headers to avoid breaking with newer kernels

BR2_KERNEL_HEADERS_3_8=y

# Kernel

BR2_LINUX_KERNEL=y

BR2_LINUX_KERNEL_CUSTOM_VERSION=y

BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.8"

BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y

BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.8.config"

BR2_LINUX_KERNEL_UIMAGE=y

BR2_LINUX_KERNEL_DTS_SUPPORT=y

BR2_LINUX_KERNEL_INTREE_DTS_NAME="p1010rdb"

# Serial port config

BR2_TARGET_GENERIC_GETTY=y

BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"

# Bootloader

BR2_TARGET_UBOOT=y

BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"

BR2_TARGET_UBOOT_2012_10=y