Merge branch 'next'

CONFIG_EXPERIMENTAL=y

# CONFIG_LOCALVERSION_AUTO is not set

CONFIG_DEFAULT_HOSTNAME="beaglebone"

CONFIG_SYSVIPC=y

CONFIG_POSIX_MQUEUE=y

CONFIG_NO_HZ=y

CONFIG_HIGH_RES_TIMERS=y

CONFIG_BSD_PROCESS_ACCT=y

CONFIG_BSD_PROCESS_ACCT_V3=y

CONFIG_FHANDLE=y

CONFIG_SPARSE_IRQ=y

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_NAMESPACES=y

CONFIG_LOG_BUF_SHIFT=16

CONFIG_BLK_DEV_INITRD=y

CONFIG_CC_OPTIMIZE_FOR_SIZE=y

CONFIG_SYSCTL_SYSCALL=y

CONFIG_KALLSYMS_ALL=y

CONFIG_EMBEDDED=y

CONFIG_SLAB=y

CONFIG_PROFILING=y

CONFIG_OPROFILE=m

CONFIG_KPROBES=y

CONFIG_MODULES=y

CONFIG_MODULE_FORCE_LOAD=y

CONFIG_MODULE_UNLOAD=y

CONFIG_MODULE_FORCE_UNLOAD=y

CONFIG_MODVERSIONS=y

CONFIG_BLK_DEV_INTEGRITY=y

# CONFIG_BLK_DEV_BSG is not set

CONFIG_ARCH_OMAP=y

CONFIG_OMAP_RESET_CLOCKS=y

CONFIG_OMAP_MUX_DEBUG=y

CONFIG_OMAP_MBOX_FWK=y

# CONFIG_OMAP_32K_TIMER is not set

# CONFIG_MACH_OMAP_GENERIC is not set

# CONFIG_ARCH_OMAP2 is not set

# CONFIG_ARCH_OMAP3 is not set

# CONFIG_ARCH_OMAP4 is not set

# CONFIG_SOC_OMAP3430 is not set

# CONFIG_MACH_OMAP3_BEAGLE is not set

# CONFIG_MACH_DEVKIT8000 is not set

# CONFIG_MACH_OMAP_LDP is not set

# CONFIG_MACH_OMAP3530_LV_SOM is not set

# CONFIG_MACH_OMAP3_TORPEDO is not set

# CONFIG_MACH_ENCORE is not set

# CONFIG_MACH_OVERO is not set

# CONFIG_MACH_OMAP3EVM is not set

# CONFIG_MACH_OMAP3517EVM is not set

# CONFIG_MACH_OMAP3_PANDORA is not set

# CONFIG_MACH_OMAP3_TOUCHBOOK is not set

# CONFIG_MACH_OMAP_3430SDP is not set

# CONFIG_MACH_NOKIA_RM680 is not set

# CONFIG_MACH_NOKIA_RX51 is not set

# CONFIG_MACH_OMAP_ZOOM2 is not set

# CONFIG_MACH_OMAP_ZOOM3 is not set

# CONFIG_MACH_CM_T35 is not set

# CONFIG_MACH_CM_T3517 is not set

# CONFIG_MACH_IGEP0020 is not set

# CONFIG_MACH_IGEP0030 is not set

# CONFIG_MACH_SBC3530 is not set

# CONFIG_MACH_OMAP_3630SDP is not set

# CONFIG_MACH_TI8168EVM is not set

# CONFIG_MACH_TI8148EVM is not set

# CONFIG_MACH_AM335XIAEVM is not set

CONFIG_OMAP3_EDMA=y

CONFIG_ARM_THUMBEE=y

CONFIG_ARM_ERRATA_430973=y

CONFIG_NO_HZ=y

CONFIG_HIGH_RES_TIMERS=y

CONFIG_THUMB2_KERNEL=y

CONFIG_ARM_ERRATA_720789=y

CONFIG_ARM_ARCH_TIMER=y

CONFIG_ZBOOT_ROM_TEXT=0x0

CONFIG_ZBOOT_ROM_BSS=0x0

CONFIG_CMDLINE=" debug "

CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"

CONFIG_KEXEC=y

CONFIG_AUTO_ZRELADDR=y

CONFIG_CPU_FREQ=y

CONFIG_CPU_FREQ_STAT_DETAILS=y

CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y

CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y

CONFIG_CPU_FREQ_GOV_POWERSAVE=y

CONFIG_CPU_FREQ_GOV_ONDEMAND=y

CONFIG_CPU_FREQ_GOV_USERSPACE=y

CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

CONFIG_NEON=y

CONFIG_BINFMT_MISC=y

# CONFIG_SUSPEND is not set

CONFIG_PM_DEBUG=y

CONFIG_NET=y

CONFIG_PACKET=y

CONFIG_UNIX=y

CONFIG_XFRM_USER=y

CONFIG_NET_KEY=y

CONFIG_NET_KEY_MIGRATE=y

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

# CONFIG_INET_XFRM_MODE_TRANSPORT is not set

# CONFIG_INET_XFRM_MODE_TUNNEL is not set

# CONFIG_INET_XFRM_MODE_BEET is not set

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

CONFIG_IP_PNP_RARP=y

# CONFIG_INET_LRO is not set

# CONFIG_INET_DIAG is not set

# CONFIG_IPV6 is not set

# CONFIG_WIRELESS is not set

CONFIG_RFKILL_REGULATOR=m

CONFIG_DEVTMPFS=y

CONFIG_DEVTMPFS_MOUNT=y

CONFIG_OMAP_OCP2SCP=y

CONFIG_OMAP_INTERCONNECT=y

CONFIG_CONNECTOR=y

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_COUNT=2

CONFIG_BLK_DEV_RAM_SIZE=65536

CONFIG_MISC_DEVICES=y

CONFIG_BMP085=m

CONFIG_EEPROM_AT24=y

CONFIG_EEPROM_93CX6=m

CONFIG_SENSORS_LIS3_I2C=y

CONFIG_BLK_DEV_RAM_SIZE=16384

CONFIG_EEPROM_93CX6=y

CONFIG_BLK_DEV_SD=y

CONFIG_SCSI_MULTI_LUN=y

CONFIG_SCSI_SCAN_ASYNC=y

CONFIG_ATA=y

# CONFIG_SATA_PMP is not set

CONFIG_SATA_AHCI_PLATFORM=m

# CONFIG_ATA_SFF is not set

CONFIG_NETDEVICES=y

CONFIG_MII=y

# CONFIG_NET_VENDOR_BROADCOM is not set

# CONFIG_NET_VENDOR_CHELSIO is not set

# CONFIG_NET_VENDOR_CIRRUS is not set

# CONFIG_NET_VENDOR_FARADAY is not set

# CONFIG_NET_VENDOR_INTEL is not set

# CONFIG_NET_VENDOR_MARVELL is not set

# CONFIG_NET_VENDOR_SMSC is not set

# CONFIG_NET_VENDOR_STMICRO is not set

CONFIG_TI_CPSW=y

# CONFIG_NET_VENDOR_WIZNET is not set

CONFIG_SMSC_PHY=y

# CONFIG_WLAN is not set

CONFIG_INPUT_POLLDEV=m

# CONFIG_INPUT_MOUSEDEV is not set

CONFIG_INPUT_EVDEV=y

# CONFIG_KEYBOARD_ATKBD is not set

CONFIG_KEYBOARD_GPIO=y

# CONFIG_MOUSE_PS2 is not set

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

CONFIG_INPUT_MISC=y

CONFIG_INPUT_AD714X=m

CONFIG_INPUT_BMA150=m

CONFIG_INPUT_MMA8450=m

CONFIG_INPUT_MPU3050=m

CONFIG_INPUT_ATI_REMOTE2=m

CONFIG_INPUT_KEYSPAN_REMOTE=m

CONFIG_INPUT_KXTJ9=m

CONFIG_INPUT_POWERMATE=m

CONFIG_INPUT_YEALINK=m

CONFIG_INPUT_CM109=m

CONFIG_INPUT_TWL4030_PWRBUTTON=y

CONFIG_INPUT_TWL4030_VIBRA=m

CONFIG_INPUT_TWL6040_VIBRA=m

CONFIG_INPUT_UINPUT=m

CONFIG_INPUT_PCF8574=m

CONFIG_INPUT_GPIO_ROTARY_ENCODER=m

CONFIG_INPUT_ADXL34X=m

CONFIG_INPUT_CMA3000=m

CONFIG_INPUT_CMA3000_I2C=m

# CONFIG_SERIO is not set

CONFIG_VT_HW_CONSOLE_BINDING=y

# CONFIG_LEGACY_PTYS is not set

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250_DETECT_IRQ=y

CONFIG_SERIAL_8250_RSA=y

CONFIG_HW_RANDOM=y

CONFIG_RAW_DRIVER=m

CONFIG_I2C_CHARDEV=y

CONFIG_SPI=y

CONFIG_SPI_GPIO=m

CONFIG_SPI_OMAP24XX=y

CONFIG_SPI_SPIDEV=m

CONFIG_DEBUG_PINCTRL=y

CONFIG_PINCTRL_SINGLE=y

CONFIG_DEBUG_GPIO=y

CONFIG_GPIO_SYSFS=y

CONFIG_GPIO_TWL4030=y

CONFIG_GENERIC_PWM=y

CONFIG_DAVINCI_EHRPWM=y

CONFIG_ECAP_PWM=y

CONFIG_W1=y

CONFIG_POWER_SUPPLY=y

# CONFIG_HWMON is not set

CONFIG_THERMAL=y

CONFIG_THERMAL_GOV_FAIR_SHARE=y

CONFIG_THERMAL_GOV_USER_SPACE=y

CONFIG_CPU_THERMAL=y

CONFIG_WATCHDOG=y

CONFIG_OMAP_WATCHDOG=y

CONFIG_TWL4030_WATCHDOG=y

CONFIG_MFD_TPS65217=y

CONFIG_REGULATOR_DUMMY=y

CONFIG_REGULATOR_FIXED_VOLTAGE=y

CONFIG_REGULATOR_VIRTUAL_CONSUMER=y

CONFIG_REGULATOR_USERSPACE_CONSUMER=y

CONFIG_REGULATOR_GPIO=y

CONFIG_REGULATOR_TWL4030=y

CONFIG_REGULATOR_TPS65023=y

CONFIG_REGULATOR_TPS6507X=y

CONFIG_REGULATOR_TPS65217=y

CONFIG_DISPLAY_SUPPORT=y

CONFIG_HIDRAW=y

CONFIG_USB=y

CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

CONFIG_USB_DEVICEFS=y

CONFIG_USB_MUSB_HDRC=y

CONFIG_USB_MUSB_TI81XX_GLUE=y

CONFIG_USB_TI_CPPI41_DMA_HW=y

CONFIG_USB_ACM=y

CONFIG_USB_LIBUSUAL=y

CONFIG_USB_SUSPEND=y

CONFIG_USB_MON=y

CONFIG_USB_MUSB_HDRC=m

CONFIG_USB_MUSB_AM35X=m

CONFIG_USB_STORAGE=y

CONFIG_USB_TEST=y

CONFIG_OMAP_USB2=m

CONFIG_OMAP_USB3=m

CONFIG_OMAP_CONTROL_USB=y

CONFIG_USB_GADGET=y

CONFIG_USB_GADGET_MUSB_HDRC=y

CONFIG_USB_GADGET_DEBUG=y

CONFIG_USB_GADGET_DEBUG_FILES=y

CONFIG_USB_GADGET_DEBUG_FS=y

CONFIG_USB_ZERO=m

CONFIG_USB_ETH=m

CONFIG_USB_ETH_EEM=y

CONFIG_USB_MASS_STORAGE=m

CONFIG_USB_G_SERIAL=m

CONFIG_USB_CDC_COMPOSITE=m

CONFIG_USB_G_MULTI=m

CONFIG_USB_G_HID=m

CONFIG_USB_G_MULTI_CDC=y

CONFIG_MMC=y

CONFIG_MMC_UNSAFE_RESUME=y

CONFIG_MMC_OMAP_HS=y

CONFIG_SDIO_UART=y

CONFIG_MMC_OMAP=y

CONFIG_NEW_LEDS=y

CONFIG_LEDS_CLASS=y

CONFIG_LEDS_GPIO=y

CONFIG_LEDS_TRIGGERS=y

CONFIG_LEDS_TRIGGER_TIMER=y

CONFIG_LEDS_TRIGGER_ONESHOT=y

CONFIG_LEDS_TRIGGER_HEARTBEAT=y

CONFIG_LEDS_TRIGGER_BACKLIGHT=y

CONFIG_LEDS_TRIGGER_CPU=y

CONFIG_LEDS_TRIGGER_GPIO=y

CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

CONFIG_UIO=m

CONFIG_UIO_PDRV=m

CONFIG_UIO_PDRV_GENIRQ=m

CONFIG_UIO_PRUSS=m

CONFIG_RTC_CLASS=y

CONFIG_RTC_DRV_OMAP=y

CONFIG_DMADEVICES=y

CONFIG_TI_EDMA=y

CONFIG_DMA_OMAP=y

CONFIG_STAGING=y

CONFIG_IIO=y

CONFIG_IIO_BUFFER=y

CONFIG_IIO_SW_RING=y

CONFIG_IIO_KFIFO_BUF=y

# CONFIG_IOMMU_SUPPORT is not set

CONFIG_PM_DEVFREQ=y

CONFIG_DEVFREQ_GOV_USERSPACE=y

CONFIG_EXT2_FS=y

CONFIG_EXT3_FS=y

# CONFIG_EXT3_FS_XATTR is not set

CONFIG_EXT4_FS=y

CONFIG_EXT4_FS_POSIX_ACL=y

CONFIG_FANOTIFY=y

CONFIG_QUOTA=y

CONFIG_QFMT_V2=y

CONFIG_MSDOS_FS=y

CONFIG_VFAT_FS=y

CONFIG_TMPFS=y

CONFIG_TMPFS_POSIX_ACL=y

# CONFIG_NETWORK_FILESYSTEMS is not set

# CONFIG_MISC_FILESYSTEMS is not set

CONFIG_NFS_FS=y

CONFIG_ROOT_NFS=y

CONFIG_NLS_CODEPAGE_437=y

CONFIG_NLS_ISO8859_1=y

CONFIG_NLS_UTF8=y

CONFIG_PRINTK_TIME=y

CONFIG_MAGIC_SYSRQ=y

CONFIG_DEBUG_FS=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_SCHEDSTATS=y

CONFIG_TIMER_STATS=y

CONFIG_PROVE_LOCKING=y

# CONFIG_DEBUG_BUGVERBOSE is not set

# CONFIG_FTRACE is not set

CONFIG_DEBUG_LL=y

CONFIG_EARLY_PRINTK=y

CONFIG_DEBUG_JTAG_ENABLE=y

CONFIG_DEBUG_INFO=y

CONFIG_CRYPTO_MANAGER=m

CONFIG_CRYPTO_SHA256=m

CONFIG_CRYPTO_DEFLATE=y

CONFIG_CRYPTO_LZO=y

# CONFIG_CRYPTO_ANSI_CPRNG is not set

# CONFIG_CRYPTO_HW is not set

CONFIG_CRC_CCITT=y

CONFIG_CRC_T10DIF=y

CONFIG_CRC_ITU_T=y

CONFIG_CRC7=y

CONFIG_LIBCRC32C=y

CONFIG_AVERAGE=y

setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}

fatload mmc 0 0x43000000 script.bin

fatload mmc 0 0x48000000 uImage

bootm 0x48000000

#! /bin/sh

# mkCubieCard.sh v0.1:

# 2013, Carlo Caione <carlo.caione@gmail.com>

# heavely based on :

# mkA10card.sh v0.1

# 2012, Jason Plum <jplum@archlinuxarm.org>

# loosely based on :

# mkcard.sh v0.5

# (c) Copyright 2009 Graeme Gregory <dp@xora.org.uk>

# Licensed under terms of GPLv2

#

# Parts of the procudure base on the work of Denys Dmytriyenko

# http://wiki.omap.com/index.php/MMC_Boot_Format

IMAGES_DIR=$1

SPL_IMG=$IMAGES_DIR/sunxi-spl.bin

UBOOT_IMG=$IMAGES_DIR/u-boot.bin

UIMAGE=$IMAGES_DIR/uImage

BIN_BOARD_FILE=$IMAGES_DIR/script.bin

ROOTFS=$IMAGES_DIR/rootfs.tar

BOOT_CMD_H=$IMAGES_DIR/boot.scr

export LC_ALL=C

if [ $# -ne 2 ]; then

	echo "Usage: $0 <images_dir> <drive>"

	exit 1;

fi

if [ $EUID -ne 0 ]; then

	echo "This script must be run as root" 1>&2

	exit 1

fi

if [ ! -f $SPL_IMG ] ||

   [ ! -f $UBOOT_IMG ] ||

   [ ! -f $UIMAGE ] ||

   [ ! -f $BIN_BOARD_FILE ] ||

   [ ! -f $ROOTFS ] ||

   [ ! -f $BOOT_CMD_H ]; then

	echo "File(s) missing."

	exit 1

fi

DRIVE=$2

P1=`mktemp -d`

P2=`mktemp -d`

dd if=/dev/zero of=$DRIVE bs=1M count=3

SIZE=`fdisk -l $DRIVE | grep Disk | grep bytes | awk '{print $5}'`

echo DISK SIZE - $SIZE bytes

# ~2048, 16MB, FAT, bootable

# ~rest of drive, Ext4

{

echo 32,512,0x0C,*

echo 544,,,-

} | sfdisk -D $DRIVE

sleep 1

if [ -b ${DRIVE}1 ]; then

	D1=${DRIVE}1

	umount ${DRIVE}1

	mkfs.vfat -n "boot" ${DRIVE}1

else

	if [ -b ${DRIVE}p1 ]; then

		D1=${DRIVE}p1

		umount ${DRIVE}p1

		mkfs.vfat -n "boot" ${DRIVE}p1

	else

		echo "Cant find boot partition in /dev"

		exit 1

	fi

fi

if [ -b ${DRIVE}2 ]; then

	D2=${DRIVE}2

	umount ${DRIVE}2

	mkfs.ext4 -L "Cubie" ${DRIVE}2

else

	if [ -b ${DRIVE}p2 ]; then

		D2=${DRIVE}p2

		umount ${DRIVE}p2

		mkfs.ext4 -L "Cubie" ${DRIVE}p2

	else

		echo "Cant find rootfs partition in /dev"

		exit 1

	fi

fi

mount $D1 $P1

mount $D2 $P2

# write uImage

cp $UIMAGE $P1

# write board file

cp $BIN_BOARD_FILE $P1

# write u-boot script

cp $BOOT_CMD_H $P1

# write rootfs

tar -C $P2 -xvf $ROOTFS

sync

umount $D1

umount $D2

rm -fr $P1

rm -fr $P2

# write SPL

dd if=$SPL_IMG of=$DRIVE bs=1024 seek=8

# write mele u-boot

dd if=$UBOOT_IMG of=$DRIVE bs=1024 seek=32

#!/bin/sh

# post-build.sh for CubieBoard

# 2013, Carlo Caione <carlo.caione@gmail.com>

BOARD_DIR="$(dirname $0)"

MKIMAGE=$HOST_DIR/usr/bin/mkimage

BOOT_CMD=$BOARD_DIR/boot.cmd

BOOT_CMD_H=$BINARIES_DIR/boot.scr

# U-Boot script

if [ -e $MKIMAGE -a -e $BOOT_CMD ];

then

	$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H

fi

cubieboard

-----

Intro

-----

To be able to use your cubieboard board with the images generated by

Buildroot you have to correctly setup the SD card.

For more information, please see http://linux-sunxi.org/FirstSteps

---------------

How to build it

---------------

You need to use the cubieboard_defconfig, to do so:

 * make cubieboard_defconfig

And to compile:

 * make

-----------------

What is generated

-----------------

After building, you should obtain this tree:

    output/images/

    +-- rootfs.tar

    +-- boot.scr

    +-- script.bin

    +-- sunxi-spl.bin

    +-- u-boot.bin

    `-- uImage

--------------------------

How setting up the SD card

--------------------------

Depending on the rootfs size, you might want to use a 2GB or larger SD-card.

The script mkcubiecard.sh will take care of partitioning and formatting

the SD-card.

BEWARE! This process will erase your SD card.

Use dmesg to find out where the SD card is attached in the /dev tree

(<device>) and then:

# sudo ./mkcubiecard.sh <images_dir> <device>

where:

 - <images_dir> is the directory containing the generated files (usually

   output/images)

 - <device> is the device file of the SD card (usually /dev/sdX)

--

Carlo Caione <carlo.caione@gmail.com>