Commit 167cda0f authored by Ray Kinsella's avatar Ray Kinsella Committed by Thomas Petazzoni
Browse files

board: readme.txt for Intel Galileo Gen 1/2 



Created a readme.txt for the Intel Galileo Gen 1/2 that describes,

 * How to build for the Intel Galileo Gen 1/2
 * How to access the console on the Intel Galileo Gen 1/2

Signed-off-by: default avatarRay Kinsella <ray.kinsella@intel.com>
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
parent a6bd7ec3

board/intel/galileo/readme.txt

0 → 100644
+52 −0
Original line number Diff line number Diff line 


Intel Galileo Gen 1/2



Intro

============



These instructions apply to both the Intel Galileo Gen 1/2 development boards

based on the Intel Quark X1000.



How to build

============



Apply the defconfig for the Intel Galileo Gen 1/2



 $ make galileo_defconfig



Add any additional packages required and build.



 $ make



The build process will create a SD card image and place it in output/images.



 $ ls -lh output/images/sdcard.img

 -rw-r--r--. 1 foo foo 11M Nov 17 16:19 output/images/sdcard.img



Write the image to an mSD card, insert into the Galileo and power on.



 $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync



Accessing the console

=====================



During power-on the console will become available on the Galileo's ttyS1. This 

may be accessed as follows.



 * Galileo Gen 1



	http://clayskits.com/products/galileo-gen-1-serial-cable



	A USB to RS-232 to 3.5mm Jack cable is required. Connect to the 3.5mm

	Jack next to the Ethernet Header.



 * Galileo Gen 2



	http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm



	A FTDI TTL-232R-3V3 cable may be used to connect to the FTDI header 

	next to the Ethernet connector on the Galileo Gen 2. 



The console should now be visible at 115200 baud.



 $ picocom -b 115200 /dev/ttyUSB0