configs/p1010rdb: bump to the latest and greatest versions

CONFIG_PPC_85xx=y

CONFIG_PHYS_64BIT=y

CONFIG_EXPERIMENTAL=y

CONFIG_SYSVIPC=y

CONFIG_POSIX_MQUEUE=y

CONFIG_BSD_PROCESS_ACCT=y

CONFIG_AUDIT=y

CONFIG_IRQ_DOMAIN_DEBUG=y

CONFIG_NO_HZ=y

CONFIG_HIGH_RES_TIMERS=y

CONFIG_BSD_PROCESS_ACCT=y

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_IP_MROUTE=y

CONFIG_IP_PIMSM_V1=y

CONFIG_IP_PIMSM_V2=y

CONFIG_ARPD=y

CONFIG_INET_ESP=y

# CONFIG_INET_XFRM_MODE_BEET is not set

CONFIG_INET_LRO=y

CONFIG_IPV6=y

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

CONFIG_DEVTMPFS=y

CONFIG_MTD=y

CONFIG_MTD_CMDLINE_PARTS=y

CONFIG_MTD_CHAR=y

CONFIG_MTD_BLOCK=y

CONFIG_FTL=y

CONFIG_MTD_CFI=y

CONFIG_GIANFAR=y

CONFIG_VITESSE_PHY=y

CONFIG_FIXED_PHY=y

CONFIG_SERIO_LIBPS2=y

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250_CONSOLE=y

CONFIG_SERIAL_8250_NR_UARTS=2

CONFIG_SERIAL_8250_MANY_PORTS=y

CONFIG_SERIAL_8250_DETECT_IRQ=y

CONFIG_SERIAL_8250_RSA=y

CONFIG_SERIAL_QE=m

CONFIG_NVRAM=y

CONFIG_I2C=y

CONFIG_I2C_CHARDEV=y

CONFIG_I2C_CPM=m

CONFIG_I2C_MPC=y

CONFIG_SPI=y

CONFIG_SPI_FSL_SPI=y

CONFIG_SPI_FSL_ESPI=y

CONFIG_GPIO_MPC8XXX=y

# CONFIG_HWMON is not set

CONFIG_USB=y

CONFIG_USB_MON=y

CONFIG_RTC_DRV_CMOS=y

CONFIG_DMADEVICES=y

CONFIG_FSL_DMA=y

# CONFIG_NET_DMA is not set

CONFIG_EXT4_FS=y

CONFIG_EXT4_USE_FOR_EXT23=y

CONFIG_MSDOS_FS=m

CONFIG_VFAT_FS=y

CONFIG_PROC_KCORE=y

CONFIG_ROOT_NFS=y

CONFIG_NFSD=y

CONFIG_CRC_T10DIF=y

CONFIG_DEBUG_INFO=y

CONFIG_DEBUG_FS=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DEBUG_INFO=y

CONFIG_CRYPTO_PCBC=m

CONFIG_CRYPTO_SHA256=y

CONFIG_CRYPTO_SHA512=y

CONFIG_CRYPTO_AES=y

# CONFIG_CRYPTO_ANSI_CPRNG is not set

CONFIG_CRYPTO_DEV_FSL_CAAM=y

Also don't go playing around with different U-boot versions or flash targets

unless you've got the necessary hardware and/or know-how to unbrick your kit.

2013.10 is known good for NOR.

2014.01 is known good for NOR on the P1010RDB-PA kit.

Freescale released a revised version of the kit with a faster processor and

some other hardware changes named P1010RDB-PB. U-Boot needs to be configured

differently for this kit hence this default config WILL NOT WORK.

This is ONLY related to U-Boot, otherwise the configuration is the same,

you can perfectly use the generated kernel and rootfs.

IF you want to build an U-Boot for the new kit just change

BR2_TARGET_UBOOT_BOARDNAME from P1010RDB-PA_NOR to P1010RDB-PB_NOR.

!!!!! THIS IS COMPLETELY UNTESTED BY BR DEVS SO YOU ARE ON YOUR OWN !!!!!

If it works we'd like to know so drop an email to the mailing list. Thanks.

If your kit doesn't mention PA nor PB in their shipping inventory then it's

the old version (PA).

******************** WARNING ********************

You'll need to program the files created by buildroot into the flash.

# Lock headers version to match and avoid breakage

BR2_KERNEL_HEADERS_VERSION=y

BR2_DEFAULT_KERNEL_VERSION="3.12"

BR2_DEFAULT_KERNEL_VERSION="3.13"

# Kernel

BR2_LINUX_KERNEL=y

BR2_LINUX_KERNEL_CUSTOM_VERSION=y

BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12"

BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13"

BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y

BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.12.config"

BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.13.config"

BR2_LINUX_KERNEL_UIMAGE=y

BR2_LINUX_KERNEL_DTS_SUPPORT=y

BR2_LINUX_KERNEL_INTREE_DTS_NAME="p1010rdb"

# Bootloader

BR2_TARGET_UBOOT=y

BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"

BR2_TARGET_UBOOT_BOARDNAME="P1010RDB-PA_NOR"

BR2_TARGET_UBOOT_CUSTOM_VERSION=y

BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.10"

BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2014.01"